inner1.jpg

Terms and Conditions of Purchase
Rev B 01/25/2017

Per Requirements of AS9100C section 7.4.2

Diamond Mold, Inc. is a Registered Company to ISO 9001:2008 and Aerospace AS9100C Standard. Seller and service providers to Diamond Mold, Inc. must agree and follow the Terms and Conditions listed below, in order to provide Diamond Mold, Inc. with raw materials or services.

For clarification purposes in this document, the term "Seller" shall refer to the Company or entity that Diamond Mold, Inc. contracts with, via a formal Purchase Order, to provide the raw materials, components or services as required.

Materials include metals, plastics, etc. necessary for manufacturing / fabricating parts required by Diamond Mold, Inc. customers. Other services required such as Heat Treating, Plating, Passivation, Grinding, Machining Processes, Laser Cutting, Non-Destructive Testing, etc. are also included.

Sellers by agreeing to this Purchase Order "PO" will agree to the following terms and conditions:

1. Acknowledgement of this order is required within three (3) business days confirming definite quantity, price and delivery.


2. Diamond Mold, Inc. reserves the right to cancel any item not received by the required date as denoted on the PO.


3. CERTIFICATION TO ALL APPLICABLE OR STATED SPECIFICATIONS MUST ACCOMPANY ALL MATERIAL, ITEMS or SERVICES. The seller must also agree to keep, retain, and maintain records that are legible, readily identifiable and are completely retrievable, that were produced during the manufacture of the product items and or services for a minimum of ten (10) Years. If this "records retention process" is required for more than 10 years, Diamond Mold, Inc. will provide instructions on the PO.


4. The seller shall notify Diamond Mold, Inc. of changes in product and or process, or changes of sub suppliers, or changes of manufacturing facility location, in writing prior to vendor confirmation or immediately as applicable.


5. Seller gives Diamond Mold, Inc., its customers and regulatory authorities the right of access to the applicable areas of all facilities, at any level of the supply chain, involved in the order. This right of access shall also apply to all applicable seller/supplier records for the product or services provided per condition 3 above if applicable.


6.1 For procured items requiring Government Source Inspection (GSI): ALL WORK ON THIS ORDER IS SUBJECT TO INSPECTION AND TEST BY THE GOVERNMENT AT ANY TIME AND PLACE. THE GOVERNMENT QUALITY REPRESENTATIVE WHO HAS BEEN DELEGATED THE NASA QUALITY ASSURANCE FUNCTION ON THIS PROCUREMENT SHALL BE NOTIFIED IMMEDIATELY UPON RECEIPT OF THIS ORDER. THE GOVERNMENT REPRESENTATIVE SHALL ALSO BE NOTIFIED 48 HOURS IN ADVANCE OF THE TIME ARTICLES OR MATERIALS ARE READY FOR INSPECTION OR TEST.


6.2 THE GOVERNMENT HAS THE RIGHT TO INSPECT ANY OR ALL OF THE WORK INCLUDED IN THIS ORDER AT THE SUPPLIER’S PLANT.


7. The seller must notify Diamond Mold, Inc. in writing of the use of any and all sub-tier suppliers and flow down all applicable requirements in the vendor's purchasing document, including key characteristics as required.


8. The seller must notify Diamond Mold, Inc. of nonconforming product. In the event of nonconforming product, the seller must obtain approval for disposition of nonconformance (i.e. rework, acceptance as is, etc.) if applicable from appropriate personnel at Diamond Mold, Inc.